Pre-filtration type 1 for softeners - Cintropur NW-25

Pre-filtration type 1 for softeners - Cintropur NW-25

Advice team of prefiltration of high quality which makes filters takes more to clog it and there is less loss in water pressure in comparison with a conventional computer. Recommended in the installation of any equipment of descaling.



More details

88,00 € tax incl.


     Made from first quality synthetic materials, the Cintropur filters are suitable for foodstuffs and drinking water.

     Head: polypropylene reinforced with glass fibers

     Campaign: Styrene acrylonitrile (S.A.N.) - transparent and impact-resistant

     Helix centrifugal and cover fixing: polyethylene

     Filter sleeves: synthetic fibres, non-woven, not made felt

     O-rings: nitrile butadiene rubber (NBR)

     Technical characteristics:

- Filtration fineness: 5, 10, 25, 50, 100 micron (also 150 Micron nylon for NW25 and NW32)

- Maximum temperature: 50 degrees continuous

- Utilization (explosion 30 bar pressure) maximum pressure: 10 bar

-Flow averages for D P 0.2 bar (with membrane filter 25 micron):

-NW18: 3.5 m3/hour

-NW25: 5.5 m3/hour

-NW32: 6.5 m3/hour

-The transparency of the glass allows the visual control of the impurities (manometer optional) tank.

-It is recommended the replacement of filter sleeve, by the drinking less twice a year, for water.

-The Cup is screwed only by hand, can be removed using the wrench.

-The connection is done manually, without tools, using the fitting of 2 parts supplied with the filter.


Ask for other models, and international transport



No products

Shipping 0,00 €
Total 0,00 €

Cart Check out

att al cliente-engl